Check manual page of dell_poweredge_temp
Dell PowerEdge Server: Temperature Sensors
Distribution: | official part of Check_MK |
License: | GPL |
Supported Agents: | SNMP |
This check monitors the temperature of Dell PowerEdge Servers by probing and
monitoring known temperature sensors on the device. Measured temperatures
may include CPU temperatures as well as air inlet temperatures and others,
depending on the device configuration.
No limits are set in the check, since limits are configured in the device
itself. The state given by the device is taken as the state of the check
as follows: If the device returns OK, the check is OK. If the device returns
other, unknown, nonCriticalUpper and nonCriticalLower a state of WARN
is returned. Otherwise the check is CRIT.
The check displays the upper warning and critical limits as configured in the device.
Further limits are not displayed, even though they may be configured. These are
UpperNonRecoverable, LowerCritical, LowerNonCritical and LowerNonRecoverable.
These limits yet may lead to state changes, the corresponding states are honoured
as outlined above.
Item
Either the name of the location variable configured for the temperature sensor, or
the chassis index and sensor index seperated by a dash.
Discovery
All temperature sensors which do not have the state settings unknown are detected