Check manual page of adva_fsp_temp

Check_MK Manual

On this page

Search in the manual

Adva FSP 3000 Optical Transport: Temperature

Distribution: official part of Check_MK
License: GPL
Supported Agents: SNMP

This checks monitors the temperature of ports and modules of the Adva FSP 3000 scalable optical transport solution.

No limits are set for the temperature, since limits are configured in the device itself. The upper and lower limits for the temperature are read from the device. If the current value is outside the allowed range the check is CRIT, otherwise it is OK.

In addition temperature trends are monitored by the check. If the rate of temperature increase is above a configured rate per configured time range, the check becomes WARN or CRIT. The check can also predict in which period of time the upper limit for the temperature configured on the device will be reached and will become WARN or CRIT if this time period is shorter than the configured one.

Item

The name of the module or port

Discovery

All temperature sensors on all modules/ports are detected