The following table shows all checks in the current check_mk distribution
that provide online documentation. You can see the same documentation
by calling check_mk with the option -M and the name of the check, for example:
| Name | Title |
|---|
| 3ware_disks | State of disks of 3ware ATA RAID Controller |
| 3ware_info | General information about 3ware ATA RAID Controller |
| 3ware_units | State of units of 3ware ATA RAID Controller |
| acme_sbc | ACME SBC: Health |
| acme_sbc.settings | ACME SBC: Health Settings |
| ad_replication | State of Microsoft Active Directory Replication between DCs |
| adva_fsp_current | Adva FSP 3000 Optical Transport: Current of Power Supplies |
| adva_fsp_if | Adva FSP 3000 Optical Transport: Optical Interface Status |
| adva_fsp_temp | Adva FSP 3000 Optical Transport: Temperature |
| aironet_clients | Cisco Aironet access points: Client status |
| aironet_errors | Cisco Aironet access points: CRC errors |
| aix_diskiod | Throughput on AIX hard disks |
| aix_hacmp_nodes | AIX HACMP Cluster Manager: Nodes |
| aix_hacmp_resources | AIX HACMP Cluster Manager: Resource Groups |
| aix_hacmp_services | AIX HACMP Cluster Manager: Cluster Services |
| aix_if | State of network interfaces on AIX hosts |
| aix_lvm | Mirror state of LVM logical volumes on AIX |
| aix_memory | Usage of physical and virtual RAM |
| aix_multipath | Multipathing on AIX |
| aix_sap_processlist | SAP Process List on AIX |
| akcp_daisy_temp | AKCP daisyTemp Sensor |
| akcp_exp_drycontact | AKCP Expansion Dry Contact Sensor |
| akcp_exp_humidity | AKCP Expansion Humidity Sensor |
| akcp_exp_smoke | AKCP Expansion Smoke Sensor |
| akcp_exp_temp | AKCP Expansion Sensor Temperature |
| akcp_exp_water | AKCP Expansion Water Sensor |
| akcp_sensor_drycontact | AKCP Drycontact Sensor |
| akcp_sensor_humidity | AKCP Sensor Humidity |
| akcp_sensor_temp | AKCP Sensor Temperature |
| alcatel_cpu | Alcatel switches: CPU utilization |
| alcatel_fans | Alcatel switches: Fan Status |
| alcatel_power | Alcatel switches: Power Supplies |
| alcatel_temp | Alcatel switches: Board and CPU Temperature |
| alcatel_timetra_chassis | Alcatel switches: Chassis components |
| alcatel_timetra_cpu | Alcatel switches: CPU utilization |
| allnet_ip_sensoric.humidity | ALLNET IP Sensoric: Humidity Sensors |
| allnet_ip_sensoric.pressure | ALLNET IP Sensoric: Pressure Sensors |
| allnet_ip_sensoric.temp | ALLNET IP Sensoric: Temperature Sensors |
| allnet_ip_sensoric.tension | ALLNET IP Sensoric: Electric Tension Sensors |
| apache_status | Performance indicators of Apache web server |
| apc_ats_output | APC ATS: Output Power |
| apc_ats_status | APC ATS: Status |
| apc_humidity | APC devices: Humidity |
| apc_inputs | APC UPS: Input Contacts |
| apc_inrow_airflow | APC InRow Cooling Devices: Airflow |
| apc_inrow_fanspeed | APC InRow Cooling Devices: Fanspeed |
| apc_inrow_temp | APC InRow Cooling Devices: Temperature |
| apc_mod_pdu_modules | APC Modular PDU: Modul Status |
| apc_netbotz_other_sensors | APC Netbotz Devices: Other numeric sensors summary |
| apc_netbotz_sensors | APC Netbotz Devices: Temperature sensor |
| apc_netbotz_sensors.dewpoint | APC Netbotz Devices: Dewpoint sensor |
| apc_netbotz_sensors.humidity | APC Netbotz Devices: Humidity sensor |
| apc_powerswitch | APC Powerswitch/APC PDU: Power Outlet Status |
| apc_rackpdu_power | APC PDU: electrical current |
| apc_sts_inputs | APC STS: Input Phases |
| apc_sts_source | APC STS: Used Source |
| apc_symmetra | APC Symmetra UPS: Device and battery states |
| apc_symmetra.elphase | APC Symmetra UPS: Battery current |
| apc_symmetra.temp | APC Symmetra UPS: Battery temperature |
| apc_symmetra_ext_temp | APC Symmetra UPS: external temperature sensors |
| apc_symmetra_input | APC Symmetra UPS: Input voltage |
| apc_symmetra_output | APC Symmetra UPS: Output voltage, current and load |
| apc_symmetra_power | APC Symmetra UPS: Output power |
| apc_symmetra_temp | APC Symmetra Web/SNMP Management Card: Temperature |
| apc_symmetra_test | APC Symmetra UPS: self test |
| appdynamics_memory | AppDynamics: Memory usage |
| appdynamics_sessions | AppDynamics: Number of sessions |
| appdynamics_web_container | AppDynamics: Threads and requests |
| apt | Check for normal and security updates via APT |
| arbor_peakflow_sp | Arbor Peakflow SP Memory and Swap |
| arbor_peakflow_sp.cpu_load | Arbor Peakflow SP CPU load |
| arbor_peakflow_sp.disk_usage | Arbor Peakflow SP Disk Usage |
| arbor_peakflow_sp.flows | Arbor Peakflow SP Flows |
| arbor_peakflow_tms | Arbor Peakflow TMS Memory and Swap |
| arbor_peakflow_tms.cpu_load | Arbor Peakflow TMS CPU Load |
| arbor_peakflow_tms.disk_usage | Arbor Peakflow TMS disk usage |
| arbor_peakflow_tms.host_fault | Arbor Peakflow TMS host faults |
| arbor_peakflow_tms.updates | Arbor Peakflow TMS Updates |
| arbor_pravail | Arbor Pravail Memory and Swap |
| arbor_pravail.cpu_load | Arbor Pravail CPU load |
| arbor_pravail.disk_usage | Arbor Peakflow SP Memory and Swap |
| arbor_pravail.host_fault | Arbor Pravail host fault |
| arc_raid_status | Areca Raid Controllers |
| arcserve_backup | Arcserve Backup |
| arris_cmts_cpu | Arris CMTS CPU utilization |
| arris_cmts_mem | Arris CMTS: Memory Usage |
| arris_cmts_temp | Arris CMTS Card Temperature |
| artec_documents | ARTEC Mail Archive Appliance: Number and Types Of Documents |
| artec_temp | ARTEC Mail Archive Appliance: Temperature |
| aruba_wlc_aps | Aruba Networks Wireless LAN Controller (WLC): Connected WLAN Accesspoints |
| aruba_wlc_clients | Aruba Networks Wireless LAN Controller (WLC): Number of Wifi connections |
| avaya_45xx_cpu | Avaya 45xx CPU utilization |
| avaya_45xx_fan | Avaya 45xx Chassis Fans |
| avaya_45xx_temp | Avaya 45xx Temperature |
| avaya_88xx | Avaya 88xx Temperature |
| avaya_88xx.fan | Avaya 88xx Chassis Fans |
| avaya_88xx_cpu | Avaya 88xx CPU utilization |
| barracuda_mail_latency | Barracuda SPAM Firewall: Mail Latency |
| barracuda_mailqueues | Barracuda SPAM Firewall: Active and Deferred Mail Queue Length |
| barracuda_system_cpu_util | Barracuda SPAM Firewall: System CPU Utilization |
| bintec_brrp_status | Bintec Routers: BRRP Status |
| bintec_info | Retrieve informational SNMP data about bintec routers |
| bintec_sensors.fan | Bintec Routers: Fan Speed |
| bintec_sensors.temp | Bintec Routers: Temperature Sensors |
| bintec_sensors.voltage | Bintec Routers: Voltage Sensors |
| blade_bays | IBM Blade Center: Bays |
| blade_blades | IBM Blade Center: State of Blades |
| blade_blowers | IBM Blade Center: Chassis blowers |
| blade_bx_blades | Primergy BX600 Blade Server: Blade status |
| blade_bx_load | Primergy BX600 Blade Enclosure: CPU load |
| blade_bx_powerfan | Primergy BX600 Blade Server: Power fan |
| blade_bx_powermod | Primergy BX600 Blade Enclosure: Power module |
| blade_bx_temp | Primergy BX600 Blade Server: Temperature |
| blade_health | IBM Blade Center: Summary Health State |
| blade_mediatray | IBM Blade Center: Media Trays |
| blade_powerfan | IBM Blade Center: Power Module Cooling Devices |
| blade_powermod | IBM Blade Center: Power Modules |
| bluecat_command_server | Bluecat Adonis Command Server State |
| bluecat_dhcp | Bluecat Adonis DHCP State |
| bluecat_dns | Bluecat Adonis DNS State |
| bluecat_dns_queries | Bluecat Adonis DNS Queries |
| bluecat_ha | Bluecat Adonis HA State |
| bluecat_ntp | Bluecat Adonis/ Proteus NTP |
| bluecat_threads | Bluecat Adonis: Number of Threads |
| bluecoat_diskcpu | Blue Coat Security Gateway: Disk and CPU utilization |
| bluecoat_sensors | Blue Coat Security Gateway: Hardware Sensors |
| bluecoat_sensors.temp | Blue Coat Security Gateway: Hardware Temperature Sensors |
| bluenet2_powerrail | Bachmann Bluenet2 Powerrail: Phases |
| bluenet2_powerrail.humidity | Bachmann Bluenet2 Powerrail: Humidity Sensors |
| bluenet2_powerrail.rcm | Bachmann Bluenet2 Powerrail: RCM Phases |
| bluenet2_powerrail.temp | Bachmann Bluenet2 Powerrail: Temperature Sensors |
| bluenet_meter | Bachmann Bluenet Monitored PLC Powermeter |
| bluenet_sensor | Bachmann Bluenet Monitored PDU Temperature Sensors |
| bluenet_sensor.hum | Bachmann Bluenet Monitored PDU Humidity Sensors |
| brocade.fan | Brocade FibreChannel Switches: Fans |
| brocade.power | Brocade FibreChannel Switches: Power Supplies |
| brocade.temp | Brocade FibreChannel Switches: Temperature Sensors |
| brocade_fcport | Brocade FibreChannel Switches: FibreChannel Ports |
| brocade_info | Retrieve informational SNMP data about Brocade switches |
| brocade_mlx.module_cpu | Brocade NetIron MLX devices: NI-MLX or BR-MLX Module CPU Utilization |
| brocade_mlx.module_mem | Brocade NetIron MLX devices: NI-MLX or BR-MLX Module Memory (RAM usage) |
| brocade_mlx.module_status | Brocade NetIron MLX / ADX / FGS / ICX devices: Module Overall Status |
| brocade_mlx_fan | Brocade NetIron MLX / ADX / FGS / ICX devices: Fans |
| brocade_mlx_power | Brocade NetIron MLX / ADX / FGS / ICX devices: Power Supplies |
| brocade_mlx_temp | Brocade NetIron MLX / FGS / ICX devices: Temperature Sensors |
| brocade_optical | Brocade Switches: Optical Signal Quality |
| brocade_tm | Brocade NetIron MLX devices: Traffic Manager Statistics |
| brocade_vdx_status | Brocade VDX Switches: Status |
| bvip_fans | Bosch Video over IP: Fans |
| bvip_info | Bosch Video over IP: Unit Name and Unit ID |
| bvip_link | Bosch Video over IP: Link Status |
| bvip_poe | Bosch Video over IP: Power over Ethernet power consumation |
| bvip_temp | Bosch Video over IP: Temperature |
| bvip_util | Bosch Video over IP: CPU utilization |
| bvip_video_alerts | Bosch Video over IP: Video Alerts |
| canon_pages | Canon Printer: Printed/scanned pages |
| carel_sensors | Temperature sensors for Carel air conditioning |
| carel_uniflair_cooling | Carel Uniflair cooling devices |
| casa_cpu_mem | casa module: CPU memory |
| casa_cpu_temp | casa module: CPU temperature |
| casa_cpu_util | casa module: CPU utilization |
| casa_fan | casa: Fan health status |
| casa_power | casa: Power module status |
| cbl_airlaser.hardware | CBL Airlaser: General Status |
| cbl_airlaser.status | CBL Airlaser: Powerup Status |
| check_bi_aggr | BI Aggregations |
| check_cmk_inv | Check_MK Hardware/Software-Inventory |
| check_disk_smb | Access to a SMB share / free space |
| check_dns | DNS query to a Nameserver |
| check_form_submit | HTTP Form Check |
| check_ftp | FTP Server |
| check_http | HTTP/HTTPS connection |
| check_icmp | ICMP Echo Request (Ping) |
| check_ldap | LDAP/LDAPS connection |
| check_mail | POP3/IMAP connection and optional mail forwarding |
| check_mail_loop | POP3/IMAP connection and optional mail forwarding |
| check_mailboxes | IMAP mailboxes |
| check_mk.agent_update | Check automatic agent deployments of Check_MK Agent |
| check_mk.only_from | Check IP restriction of Check_MK agent |
| check_mkevents | Event Console status for a host or application |
| check_notify_count | Check Number of Notifications per Contact |
| check_smtp | SMTP connection |
| check_sql | SQL database request check |
| check_ssh | SSH Service (Ping) |
| check_tcp | Connection to a TCP Port (unencrypted or with SSL) |
| check_traceroute | Current route to target host |
| check_uniserv | Uniserv Service |
| checkpoint_connections | Checkpoint Firewalls: Current Number of Connections |
| checkpoint_fan | Checkpoint Firewalls: Fan status |
| checkpoint_firewall | Checkpoint Firewalls: general status of filtering module |
| checkpoint_ha_problems | Checkpoint Firewalls: High Availability Problems |
| checkpoint_ha_status | Checkpoint Firewalls: High Availability Status |
| checkpoint_packets | Checkpoint Firewalls: Packet Statistics |
| checkpoint_powersupply | Checkpoint Firewalls: Power Supply |
| checkpoint_svn_status | Checkpoint Firewalls: Secure Virtual Network Status |
| checkpoint_temp | Checkpoint Firewalls: Temperature |
| checkpoint_voltage | Checkpoint Firewalls: Voltages |
| chrony | NTP time synchronization using chrony |
| cifsmounts | Health of CIFS Mounts mountet on UNIX/ Linux |
| cisco_ace_rserver | Cisco ACE Server: Status of Real Server |
| cisco_asa_failover | Cisco ASA: Cluster failover |
| cisco_asa_svcsessions | Cisco ASA SVC Sessions (SSL VPN Client) |
| cisco_cpu | CPU utilization of the last 5 minutes |
| cisco_cpu_multiitem | CPU utilization of the last 5 minutes |
| cisco_fan | Cisco switches: FAN health status |
| cisco_fantray | Cisco switches: FAN health status |
| cisco_fru_module_status | Cisco devices: Status of FRU Modules |
| cisco_fru_power | Cisco Nexus Switches: State of FRU Power Supplies |
| cisco_fru_powerusage | Cisco Core Switches: Power usage |
| cisco_hsrp | Cisco Routers: HSRP Group Status |
| cisco_mem | Memory |
| cisco_mem_asa | Memory for Cisco Adaptive Security Appliances |
| cisco_mem_asa64 | Cisco Adaptive Security Appliances Version 9.x: System Memory |
| cisco_nexus_cpu | Cisco Nexus Devices: CPU utilization |
| cisco_oldcpu | Old Cisco Devices: CPU utilization |
| cisco_power | Cisco switches: Redundant Power Supplies |
| cisco_qos | Cisco Routers: Usage of QoS classes |
| cisco_redundancy | Cisco Devices: Redundancy Framework Status |
| cisco_secure | Cisco switches: Port Security status |
| cisco_srst_call_legs | Cisco Unified Survivable Remote Site Telephony (SRST): Call Legs |
| cisco_srst_phones | Cisco Unified Survivable Remote Site Telephony (SRST): Registered Phones |
| cisco_srst_state | Cisco Unified Survivable Remote Site Telephony (SRST): Status |
| cisco_stackpower | CISCO Switch Catalyst 3750-E Series: Stack Port Link States |
| cisco_sys_mem | Cisco Nexus Supervisor Memory |
| cisco_temp | Temperature sensors (by CISCO-ENVMON-MIB) |
| cisco_temp_perf | Temperature sensors (by CISCO-ENVMON-MIB) including performance data |
| cisco_temp_sensor | Temperature sensors (by CISCO-ENTITY-SENSOR-MIB) |
| cisco_temperature | Temperature sensors (by CISCO-ENVMON-MIB or CISCO-ENTITY-SENSOR-MIB) |
| cisco_vpn_tunnel | IPSEC and Remote Access VPN-Tunnels on Cisco Devices |
| cisco_vss | Cisco switches: State of Virtual Switches |
| cisco_wlc | Cisco Wireless LAN Controller (WLC): Connected WLAN accesspoints |
| cisco_wlc_clients | Cisco Wireless LAN Controller (WLC): Number of Wifi connections |
| citrix_controller | Citrix Controller State |
| citrix_controller.licensing | Citrix Controller Licensing |
| citrix_controller.registered | Citrix Controller: Desktop Registered |
| citrix_controller.services | Citrix Controller: Active Site Services |
| citrix_controller.sessions | Citrix Controller Sessions |
| citrix_hostsystem | Citrix Host Info |
| citrix_hostsystem.vms | Citrix Host VMs |
| citrix_licenses | Citrix licenses |
| citrix_serverload | Citrix Server load (Score) |
| citrix_sessions | Citrix Sessions |
| citrix_state | Citrix VM State |
| citrix_state.controller | Citrix VM Controller |
| citrix_state.hosting_server | Citrix VM Hosting Server |
| climaveneta_alarm | Climaveneta: Alarm States |
| climaveneta_fan | Climaveneta: Fans |
| climaveneta_temp | Climaveneta: Temperature sensors |
| cmc_temp | Rittal CMC: Temperature |
| cmciii | Rittal CMC-III Units: General State |
| cmciii.access | Rittal CMC-III Access Modules: Status |
| cmciii.can_current | Rittal CMC-III PU: Canbus and Current |
| cmciii.humidity | Rittal CMC-III Units: humidity |
| cmciii.io | Rittal CMC-III IO Units: Status of Input and Output Ports |
| cmciii.phase | Rittal CMC-III PDUs: Input Phases |
| cmciii.psm_current | Rittal CMC-III PSM: Currents |
| cmciii.psm_plugs | Rittal CMC-III PSM: Plugs |
| cmciii.sensor | Rittal CMC-III Sensor Modules: Status |
| cmciii.temp | Rittal CMC-III Units: Temperatures |
| cmciii.temp_in_out | Rittal CMC-III Units: Temperatures |
| cmciii_lcp_airin | Rittal CMC-III LCP: Air In and Temperature |
| cmciii_lcp_airout | Rittal CMC-III LCP: Air Out Temperature |
| cmciii_lcp_fans | Rittal CMC-III LCP: Fans |
| cmciii_lcp_water | Rittal CMC-III LCP: Water In/Out Temperature |
| cmciii_lcp_waterflow | Rittal CMC-III LCP: Water Flow |
| cmctc.temp | Rittal CMC-TC: Temperature |
| cmctc_lcp.blower | Rittal CMC-TC LCP: Blowers |
| cmctc_lcp.blowergrade | Rittal CMC-TC LCP: Blower total state |
| cmctc_lcp.flow | Rittal CMC-TC LCP: Water flow |
| cmctc_lcp.regulator | Rittal CMC-TC LCP: Regulator |
| cmctc_lcp.temp | Rittal CMC-TC LCP: Temperature |
| cmctc_psm_m | Rittal CMC-TC PSM-M: Sensor State |
| cpsecure_sessions | CPSECURE (NetGear) Content Security Gateway: Number of Sessions |
| cpu.loads | CPU load |
| cpu.threads | Total number of current processes and threads |
| cups_queues | State of CUPS Printer Queues |
| datapower_cpu | IBM Datapower CPU Utilization |
| datapower_fan | IBM Datapower Fans |
| datapower_fs | IBM Datapower Filesystems |
| datapower_ldrive | IBM Datapower Logical Drives |
| datapower_mem | IBM Datapower Memory Usage |
| datapower_pdrive | IBM Datapower Physical Drives |
| datapower_raid_bat | IBM Datapower Raid Battery |
| datapower_tcp | IBM Datapower: Number of TCP Connections per state |
| datapower_temp | IBM Datapower Temperature Sensors |
| db2_backup | Last successful backup of DB2 databases |
| db2_bp_hitratios | DB2 Bufferpool Hitratios |
| db2_connections | DB2 Connections and Query Latency |
| db2_counters | DB2 Deadlocks, Lockwaits and Sortoverflows |
| db2_logsizes | DB2 Logfile Usage |
| db2_mem | Memory usage of db2 instances |
| db2_sort_overflow | DB2 Sort Overflow Percentage |
| db2_tablespaces | DB2 Tablespace Usage |
| db2_version | DB2 Version |
| decru_cpu | DECRU NAS: CPU utilization |
| decru_fans | DECRU NAS: Cooling fans |
| decru_perf | DECRU NAS: Performance values |
| decru_power | DECRU NAS: Power supply |
| decru_temps | DECRU NAS: Temperature Sensors |
| dell_chassis_fans | Dell PowerEdge Chassis: Overall Fan State |
| dell_chassis_io | Dell PowerEdge Chassis: Overall IO Module State |
| dell_chassis_kvm | Dell PowerEdge Server: Global KVM State |
| dell_chassis_power | Dell PowerEdge Chassis: Overall Power Consumption |
| dell_chassis_powersupplies | Dell PowerEdge Chassis: Power Consumption per Power Supply Unit |
| dell_chassis_slots | Dell PowerEdge Chassis: State of the Blade Slots |
| dell_chassis_status | Dell PowerEdge Server: Global State |
| dell_chassis_temp | Dell PowerEdge Chassis: Temperature Sensors |
| dell_eql_storage | Dell Equallogic SAN Storage |
| dell_idrac_disks | Dell iDrac: Disks |
| dell_idrac_virtdisks | Dell iDrac: Virtual Disks |
| dell_om_disks | Dell OpenManage: Disks |
| dell_om_esmlog | Dell OpenManage: ESM log |
| dell_om_mem | Dell OpenManage: Physical Memory |
| dell_om_processors | Dell OpenManage: Processor health |
| dell_om_sensors | Dell OpenManage: Sensors (Fan, Temperature) |
| dell_om_vdisks | Dell OpenManage: Virtual Disks |
| dell_powerconnect_cpu | Dell PowerConnect Switches: CPU load |
| dell_powerconnect_fans | Dell PowerConnect Switches: FAN sensors |
| dell_powerconnect_psu | Dell PowerConnect Switches: Power Supply Sensors |
| dell_powerconnect_temp | Dell PowerConnect Switches: Temperature Sensors |
| dell_poweredge_amperage.power | Dell PowerEdge Server: Power Consumption |
| dell_poweredge_cpu | Dell PowerEdge Server: CPU State |
| dell_poweredge_mem | Dell PowerEdge Server: State of Memory Modules |
| dell_poweredge_netdev | Dell PowerEdge Server: State of Network Devices |
| dell_poweredge_pci | Dell PowerEdge Server: State of PCI Devices |
| dell_poweredge_status | Dell PowerEdge Server: Global State |
| dell_poweredge_temp | Dell PowerEdge Server: Temperature Sensors |
| df | Used space in filesystems |
| df_netapp | NetApp Filers: Used Space in Filesystems |
| df_netapp32 | NetApp Filers: Used space in Filesystem Using 32-Bit Counters |
| df_netscaler | Citrix Netscaler: Used Space in Filesystems |
| df_zos | zOS Mainframes: Used Space in Filesystems |
| didactum_sensors_analog | Didactum devices: Temperature |
| didactum_sensors_analog.voltage | Didactum devices: Voltage |
| didactum_sensors_discrete | Didactum devices: Discrete sensors |
| diskstat | Disk throughput |
| dmi_sysinfo | Collects basic hardware infos using DMI on Linux hosts |
| dmraid.ldisks | Logical disks of DMRaid |
| dmraid.pdisks | Phyiscal disks of DMRaid |
| docsis_channels_downstream | DOCSIS: Downstream Channels |
| docsis_channels_upstream | DOCSIS: Upstream Channels |
| docsis_cm_status | DOCSIS Cable Modem Status |
| domino_info | IBM Lotus Domino: Informational Data |
| domino_mailqueues | IBM Lotus Domino: Mail Queues |
| domino_tasks | IBM Lotus Domino: Count of Tasks |
| domino_transactions | IBM Lotus Domino: Number of Transactions |
| domino_users | IBM Lotus Domino: Domino Users |
| dotnet_clrmemory | dotNet Common Language Runtime Memory |
| drbd | General state of DR:BD devices |
| drbd.disk | Disk read and writes of DR:BD devices |
| drbd.net | Network load of DR:BD devices |
| drbd.stats | Counter statistics of DR:BD devices |
| eltek_battery | USV Eltek Valere: Battery Breaker Status |
| eltek_battery.supply | USV Eltek Valere: Battery Current and Voltage |
| eltek_battery.temp | USV Eltek Valere: Battery Temperature |
| eltek_fans | USV Eltek Valere: Fans |
| eltek_outdoor_temp | USV Eltek Valere: Outdoor Temperature |
| eltek_systemstatus | USV Eltek Valere: System Status |
| emc_datadomain_disks | EMC Datadomain: Hard Disk State |
| emc_datadomain_fans | EMC Datadomain: fan status |
| emc_datadomain_fs | EMC Datadomain: Used space of filesystems via SNMP |
| emc_datadomain_mtree | EMC Datadomain: MTree Usage |
| emc_datadomain_nvbat | EMC Datadomain: Battery Status of NVRAM |
| emc_datadomain_power | EMC Datadomain: Power Modules |
| emc_datadomain_temps | EMC Datadomain: Temperature Sensors |
| emc_isilon.clusterhealth | EMC Isilon: ClusterHealth |
| emc_isilon.names | EMC Isilon: Report Cluster and Node Name |
| emc_isilon.nodehealth | EMC Isilon: NodeHealth |
| emc_isilon.nodes | EMC Isilon: Online Status of Nodes |
| emc_isilon_cpu | EMC Isilon: CPU utilization |
| emc_isilon_diskstatus | EMC Isilon: Disk Status |
| emc_isilon_fans | EMC Isilon: Fans |
| emc_isilon_ifs | EMC Isilon: Cluster storage |
| emc_isilon_iops | EMC Isilon: Disk Operations per Second (IOPS) |
| emc_isilon_power | EMC Isilon: Power Supply sensors |
| emc_isilon_quota | EMC Isilon: Used and available quotas |
| emc_isilon_temp | EMC Isilon: Temperature sensors |
| emc_isilon_temp.cpu | EMC Isilon: Temperature of CPUs |
| emc_vplex_cpu | EMC VPLEX Director CPU Utilization |
| emc_vplex_director_stats | EMC VPLEX Director Throughput |
| emc_vplex_if | Traffic and status of network interfaces using 32 bit counters |
| emc_vplex_volumes | EMC VPLEX Volume Diskstat |
| emcvnx_disks | EMC VNX Storage: Status and I/O of Disks |
| emcvnx_hba | EMC VNX Storage: iSCSI traffic on HBAs |
| emcvnx_hwstatus | EMC VNX Storage: Hardware Status |
| emcvnx_info | EMC VNX Storage: Info about Model, Revision and Serial Number |
| emcvnx_mirrorview | EMC VNX Storage: Mirror View State |
| emcvnx_raidgroups.capacity | EMC VNX Storage: Free Capacity in RAID Groups |
| emcvnx_raidgroups.capacity_contiguous | EMC VNX Storage: Contiguous Free Capacity in RAID Groups |
| emcvnx_raidgroups.list_disks | EMC VNX Storage: RAID Group: List of Disks |
| emcvnx_raidgroups.list_luns | EMC VNX Storage: RAID Group: List of LUNs |
| emcvnx_sp_util | EMC VNX Storage: Storage Processor Utilization |
| emcvnx_writecache | EMC VNX Storage: Write Cache State |
| emerson_stat | Emerson UPS: status |
| emerson_temp | Emerson UPS Device: Temperature sensor |
| enterasys_cpu_util | Enterasys Switch: CPU utilization |
| enterasys_fans | Enterasys: Fans |
| enterasys_lsnat | Enterasys: LSNAT bindings |
| enterasys_powersupply | Enterasys: Power Supplies |
| enterasys_temp | Enterasys Switch: Temperature |
| entity_sensors | ENTITY-SENSORS MIB: Temperature |
| entity_sensors.fan | ENTITY-SENSORS MIB: Fan Speed RPM |
| epson_beamer_lamp | Lamp runtime of Epson beamers |
| esx_vsphere_counters | VMWare ESX host systems: Datastore throughput |
| esx_vsphere_counters.diskio | VMWare ESX host systems: Disk throughput |
| esx_vsphere_counters.if | VMWare ESX host systems: Physical network interfaces |
| esx_vsphere_counters.ramdisk | VMWare ESX host systems: Ramdisks |
| esx_vsphere_counters.uptime | VMWare ESX host systems: Uptime |
| esx_vsphere_datastores | VMWare ESX host systems: Used space |
| esx_vsphere_hostsystem.cpu_usage | VMWare ESX host systems: CPU utilization |
| esx_vsphere_hostsystem.cpu_util_cluster | VMWare ESX host systems: CPU utilization of clusters |
| esx_vsphere_hostsystem.maintenance | VMWare ESX Host System: Maintenance State |
| esx_vsphere_hostsystem.mem_usage | VMWare ESX host systems: Usage of physical RAM |
| esx_vsphere_hostsystem.mem_usage_cluster | VMware ESX vCenter: Total physical RAM usage of clustered ESX hosts |
| esx_vsphere_hostsystem.multipath | VMWare ESX host systems: Multipath state |
| esx_vsphere_hostsystem.state | VMWare ESX Host System: Overall state and power state |
| esx_vsphere_licenses | ESX VSphere Licenses |
| esx_vsphere_objects | VMWare ESX: Location and state of VMs and host systems |
| esx_vsphere_objects.count | VMWare ESX: Number of Virtualmachnies and Hostssystems |
| esx_vsphere_sensors | VMWare ESX host systems: Hardware sensors |
| esx_vsphere_vm.cpu | Virtual Machine under ESX: number of virtual CPUs and demanded CPU GHz |
| esx_vsphere_vm.datastores | Virtual Machine under ESX: Name and disk free of datastores |
| esx_vsphere_vm.guest_tools | Virtual Machine under ESX: Guest Tools version status |
| esx_vsphere_vm.heartbeat | Virtual Machine under ESX: Heartbeat |
| esx_vsphere_vm.mem_usage | Virtual Machine under ESX: used Memory (RAM) |
| esx_vsphere_vm.name | Virtual Machine under ESX: Name of the VM |
| esx_vsphere_vm.running_on | Virtual Machine under ESX: Hostsystem the VM is running on |
| esx_vsphere_vm.snapshots | Virtual Machine under ESX: Snapshot settings |
| etherbox.humidity | Etherbox / MessPC: Sensor Humidity |
| etherbox.smoke | Etherbox / MessPC: Sensor Smoke |
| etherbox.switch | Etherbox / MessPC: Sensor Switch Contact |
| etherbox.temp | Etherbox / MessPC: Sensor Temperature |
| etherbox2_temp | Etherbox 2 / MessPC: Sensor Temperature |
| ewon | relayed data via eWON industrial VPN router |
| f5_bigip_chassis_temp | F5 BIG-IP load balancer: Chassis temperature |
| f5_bigip_cluster | F5 Big-IP: Cluster state, up to firmware version 10 |
| f5_bigip_cluster_status | F5 Big-IP: active/active or passive/active cluster status |
| f5_bigip_cluster_status_v11_2 | F5 Big-IP: active/active or passive/active cluster status |
| f5_bigip_cluster_v11 | F5 Big-IP: Cluster state for firmware version >= 11 |
| f5_bigip_conns | F5 Big-IP: number of current connections |
| f5_bigip_cpu_temp | F5 BIG-IP load balancer: CPU temperature |
| f5_bigip_fans | F5 Big-IP: System fans |
| f5_bigip_interfaces | F5 Big-IP: Special Network Interfaces |
| f5_bigip_pool | F5 Big-IP: Load Balancing Pools |
| f5_bigip_psu | F5 Big-IP: Power Supplies |
| f5_bigip_snat | F5 Big-IP: Source NAT |
| f5_bigip_vserver | F5 Big-IP: Virtual servers |
| fast_lta_headunit.replication | FAST LTA Storage Systems: Replication Status and Mode |
| fast_lta_headunit.status | FAST LTA Storage Systems: Head Unit Status |
| fast_lta_silent_cubes.capacity | FAST LTA Storage Systems: Total Capacity over all Silent Cubes |
| fast_lta_volumes | FAST LTA Storage Systems: Capacity of Volumes |
| fc_port | Fibre channel devices monitored with the FCMGMT MIB |
| filehandler | Total and used filehandles on system |
| fileinfo | Age and size of files |
| fileinfo.groups | Age, size and count of a group of files |
| fireeye_content | FireEye Appliances: Content version |
| fireeye_fans | FireEye Appliances: Fan states |
| fireeye_powersupplies | FireEye Appliances: Overall power supply status |
| fireeye_raid | FireEye Appliances: RAID status |
| fireeye_raid.disks | FireEye Appliances: Disk status |
| fireeye_sys_image | FireEye Appliances: System image |
| fireeye_sys_status | FireEye Appliances: System status |
| fireeye_temp | FireEye Appliances: Temperature |
| fjdarye100_cadaps | Fujitsu ETERNUS DX80 S2 storage systems: Channel adapters |
| fjdarye100_cmods | Fujitsu ETERNUS DX80 S2 storage systems: Status of Channel Modules |
| fjdarye100_cmods_mem | Fujitsu ETERNUS DX80 S2 storage systems: Memory of Channel Modules |
| fjdarye100_conencs | Fujitsu ETERNUS DX80 S2 storage systems: Controller enclosures |
| fjdarye100_cpsus | Fujitsu ETERNUS DX80 S2 storage systems: Power supply units mounted on CE |
| fjdarye100_devencs | Fujitsu ETERNUS DX80 S2 storage systems: Device enclosures |
| fjdarye100_disks | Fujitsu ETERNUS DX80 S2 storage systems: Disks |
| fjdarye100_disks.summary | Fujitsu ETERNUS DX80 S2 storage systems: Summarized status of all disks |
| fjdarye100_rluns | Fujitsu ETERNUS DX80 S2 storage systems: RLUNs |
| fjdarye100_sum | Fujitsu ETERNUS DX80 S2 storage systems: Summary status |
| fjdarye100_syscaps | Fujitsu ETERNUS DX80 S2 storage systems: System capacitor units |
| fjdarye101_cadaps | Fujitsu storage systems: Channel adapters FW: 2013 |
| fjdarye101_cmods | Fujitsu storage systems: Status of Channel Modules FW: 2013 |
| fjdarye101_cmods_mem | Fujitsu storage systems: Memory of Channel Modules FW: 2013 |
| fjdarye101_conencs | Fujitsu storage systems: Controller enclosures FW 2013. |
| fjdarye101_disks | Fujitsu storage systems: Disks FW 2013 |
| fjdarye101_disks.summary | Fujitsu storage systems FW 2013: Summarized status of all disks |
| fjdarye101_rluns | Fujitsu storage systems: RLUNs FW 2013 |
| fjdarye101_sum | Fujitsu storage systems: Summary status FW 2013 |
| fjdarye101_syscaps | Fujitsu storage systems: System capacitor units FW 2013. |
| fjdarye500_cadaps | Fujitsu ETERNUS DX500 S3 storage systems: Channel adapters |
| fjdarye500_cmods | Fujitsu ETERNUS DX500 S3 storage systems: Status of Channel Modules |
| fjdarye500_cmods_flash | Fujitsu ETERNUS DX500 S3 storage systems: Flash of channel modules |
| fjdarye500_cmods_mem | Fujitsu ETERNUS DX500 S3 storage systems: Memory of Channel Modules |
| fjdarye500_conencs | Fujitsu ETERNUS DX500 S3 storage systems: Controller enclosures |
| fjdarye500_cpsus | Fujitsu ETERNUS DX500 S3 storage systems: Power supply units mounted on CE |
| fjdarye500_devencs | Fujitsu ETERNUS DX500 S3 storage systems: Device enclosures |
| fjdarye500_disks | Fujitsu ETERNUS DX500 S3 storage systems: Disks |
| fjdarye500_disks.summary | Fujitsu ETERNUS DX500 S3 storage systems: Summarized status of all disks |
| fjdarye500_expanders | Fujitsu ETERNUS DX500 S3 storage systems: Expanders |
| fjdarye500_inletthmls | Fujitsu ETERNUS DX500 S3 storage systems: Inlet thermal sensors |
| fjdarye500_pfm | Fujitsu ETERNUS DX500 storage systems: Status of PCIeflash modules |
| fjdarye500_sum | Fujitsu ETERNUS DX80 S2 storage systems: Summary status |
| fjdarye500_syscaps | Fujitsu ETERNUS DX80 S2 storage systems: System capacitor units |
| fjdarye500_thmls | Fujitsu ETERNUS DX storage systems: Thermal sensors |
| fjdarye60_cadaps | Fujitsu ETERNUS DX storage systems: Status of channel adapters |
| fjdarye60_cmods | Fujitsu ETERNUS DX storage systems: Status of Channel Modules |
| fjdarye60_cmods_flash | Fujitsu ETERNUS DX storage systems: Flash of channel modules |
| fjdarye60_cmods_mem | Fujitsu ETERNUS DX storage systems: Memory of Channel Modules |
| fjdarye60_conencs | Fujitsu ETERNUS DX storage systems: Controller enclosures |
| fjdarye60_devencs | Fujitsu ETERNUS DX storage systems: Device enclosures |
| fjdarye60_disks | Fujitsu ETERNUS DX storage systems: Disks |
| fjdarye60_disks.summary | Fujitsu ETERNUS DX storage systems: Summarized status |
| fjdarye60_expanders | Fujitsu ETERNUS DX storage systems: Expanders |
| fjdarye60_inletthmls | Fujitsu ETERNUS DX storage systems: Inlet thermal sensors |
| fjdarye60_psus | Fujitsu ETERNUS DX storage systems: Power supply units |
| fjdarye60_rluns | Fujitsu ETERNUS DX storage systems: RLUNs |
| fjdarye60_sum | Fujitsu ETERNUS DX storage systems: Summary status |
| fjdarye60_syscaps | Fujitsu ETERNUS DX storage systems: System capacitor units |
| fjdarye60_thmls | Fujitsu ETERNUS DX storage systems: Thermal sensors |
| fortigate_cpu | FortiGate firewalls: CPU utilization |
| fortigate_cpu_base | FortiGate firewalls: CPU utilization |
| fortigate_ipsecvpn | FortiGate firewalls: Status of IPSec VPN Tunnels |
| fortigate_memory | FortiGate firewalls: RAM Usage |
| fortigate_memory_base | FortiGate firewalls: RAM Usage |
| fortigate_node | FortiGate firewall cluster monitoring: Info |
| fortigate_node.cpu | FortiGate firewall cluster monitoring: CPU |
| fortigate_node.memory | FortiGate firewall cluster monitoring: Memory |
| fortigate_node.sessions | FortiGate firewall cluster monitoring: Sessions |
| fortigate_sessions | FortiGate firewalls: Current Number of Sessions |
| fortigate_sessions_base | FortiGate firewalls with FORTINERT-FORTIGATE_MIB: Current Number of Sessions |
| fortigate_signatures | FortiGate firewalls: Age and version of AV and IPS signatures |
| fortigate_sslvpn | FortiGate firewalls: Status of SSL VPN Tunnels |
| fritz.config | Configuration Info of Fritz!Box |
| fritz.conn | Connection State of Fritz!Box |
| fritz.link | Network Link of Fritz!Box |
| fritz.wan_if | State of WAN network interface of Fritz!Box |
| fsc_fans | FANs of Fujitsu Siemens (FSC) Servers using ServerView Agent |
| fsc_ipmi_mem_status | Memory module status using IPMI via freeipmi |
| fsc_subsystems | Physical status of Fujitsu Siemens (FSC) Hardware parts |
| fsc_temp | Temperature status of Fujitsu Siemens (FSC) Hardware |
| genua_carp | Genuscreen: State of Carp Interfaces on Carp Clusters and Nodes |
| genua_fan | Genuscreen: Fan State and RPM |
| genua_pfstate | Genuscreen: State of Packetfilter Engine |
| genua_state_correlation | Genuscreen: Correlation of the State of Carp Interfaces |
| genua_vpn | Genuscreen: VPN state |
| gude_humidity | GUDE Power Control: Humidity |
| gude_powerbanks | GUDE Power Control: Powerbank status and electricity |
| gude_relayport | GUDE Power Control: Relay port status and electricity |
| gude_temp | GUDE Power Control: Temperature |
| h3c_lanswitch_cpu | 3COM and H3C switches: CPU utilization |
| h3c_lanswitch_sensors | 3COM and H3C switches: Fan and Power Supply |
| haproxy.frontend | HAProxy: Status of the Frontends |
| haproxy.server | HAProxy: Server Status |
| heartbeat_crm | General status of the CRM for heartbeat nodes using crm=yes |
| heartbeat_crm.resources | Status of the resources in heartbeat clusters using crm=yes |
| heartbeat_nodes | Node status and link status of heartbeat nodes |
| heartbeat_rscstatus | Ressource status of heartbeat nodes using crm=no |
| hitachi_hnas_bossock | Hitachi HNAS: Number of Bossock Fibers |
| hitachi_hnas_cifs | Hitachi HNAS: Number of Users using CIFS shares |
| hitachi_hnas_cpu | Hitachi HNAS: CPU Utilization of PNodes |
| hitachi_hnas_drives | Hitachi HNAS: Status of System Drives |
| hitachi_hnas_fan | Hitachi HNAS: Status and Speed of Fans |
| hitachi_hnas_fc_if | Hitachi HNAS: FibreChannel Interfaces |
| hitachi_hnas_fpga | Hitachi HNAS: Utilization of Field Programmable Gate Arrays (FPGAs) |
| hitachi_hnas_pnode | Hitachi HNAS: Status of Physical Nodes (PNodes) |
| hitachi_hnas_psu | Hitachi HNAS: Status of Power Supplies (PSUs) |
| hitachi_hnas_quorumdevice | Hitachi HNAS: Status of Quorum Device |
| hitachi_hnas_span | Hitachi HNAS: Usage of Spans (Storage Pools) |
| hitachi_hnas_temp | Hitachi HNAS: Status and Measured Value of Temperature Sensors |
| hitachi_hnas_vnode | Hitachi HNAS: Status of Virtual Nodes (VNodes or EVS) |
| hitachi_hnas_volume | Hitachi HNAS: Usage and Status of Volumes |
| hitachi_hus_dkc | Hitachi HUS DKC: Hardware State |
| hitachi_hus_dku | Hitachi HUS DKU: Hardware State |
| hitachi_hus_status | Hitachi HUS: Global Status |
| hivemanager_devices | Aerohive Hivemanager Devices |
| hp_blade | HP BladeSystem Enclosures: Summary Health State |
| hp_blade_blades | HP BladeSystem Enclosures: Health of Blades |
| hp_blade_fan | HP BladeSystem Enclosures: FANs |
| hp_blade_manager | HP BladeSystem Enclosures: Manager boards |
| hp_blade_psu | HP BladeSystem Enclosures: Power supplies |
| hp_eml_sum | HP StorageWorks EML E-Series Enterprise Tape Library: Summary Status |
| hp_msa_controller | HP MSA 2040: Controller CPU |
| hp_msa_controller.io | HP MSA 2040: Controller IO |
| hp_msa_disk | HP MSA 2040: Disk Health |
| hp_msa_disk.io | HP MSA 2040: Disk IO |
| hp_msa_disk.temp | HP MSA 2040: Temperature of all disks |
| hp_msa_fan | HP MSA 2040: Fan Speed and Status |
| hp_msa_if | HP MSA 2040: Interface Status, IO and Speed |
| hp_msa_psu | HP MSA 2040: Power Supply Health |
| hp_msa_psu.sensor | HP MSA 2040: Power Supply Voltage |
| hp_msa_psu.temp | HP MSA 2040: Power Supply Temperature |
| hp_msa_system | HP MSA 2040: System Health Status |
| hp_msa_volume | HP MSA 2040: Volume Health Status |
| hp_msa_volume.df | HP MSA 2040: Volume Disk Usage |
| hp_msa_volume.io | HP MSA 2040: Volume IO |
| hp_procurve_cpu | HP Procurve Switches: CPU load |
| hp_procurve_mem | HP Procurve Switches: Memory usage |
| hp_procurve_sensors | HP Procurve Switches: Power Supplies, Fans, Temperature |
| hp_procurve_temp | HP Switches: System Temperature |
| hp_proliant | HP Proliant Servers: General Status |
| hp_proliant_cpu | HP Proliant Servers: Physical CPU state |
| hp_proliant_da_cntlr | HP Proliant Servers: RAID Controllers |
| hp_proliant_da_phydrv | HP Proliant Servers: Physical Drives in Drive Arrays |
| hp_proliant_fans | HP Proliant Servers: FANs |
| hp_proliant_mem | HP Proliant Servers: Memory Modules |
| hp_proliant_power | HP Proliant Servers: Power Meter |
| hp_proliant_psu | HP Proliant Servers: Power Supplies |
| hp_proliant_raid | HP Proliant Servers: Raid status` |
| hp_proliant_temp | HP Proliant Servers: Temperature Sensors |
| hp_sts_drvbox | HP Proliant Servers: Storage System Drive Box Groups |
| hp_webmgmt_status | HP Web Management: Status |
| hpux_cpu | CPU load on HP-UX |
| hpux_fchba | Fibrechannel HBAs on HP-UX servers |
| hpux_if | Network Interfaces |
| hpux_lunstats | Throughput on HP-UX LUNs |
| hpux_lvm | Mirror state of LVM logical volumes on HP-UX |
| hpux_multipath | Multipathing on HP-UX |
| hpux_serviceguard | HP-UX Serviveguard |
| hpux_snmp_cs.cpu | CPU utilization via SNMP on HP-UX |
| hpux_tunables.maxfiles_lim | Kernel tunables: Number of open files |
| hpux_tunables.nkthread | Kernel tunables: Number of threads |
| hpux_tunables.nproc | Kernel tunables: Number of Processes |
| hpux_tunables.semmni | Kernel tunables: Number of IPC Semaphore IDs |
| hpux_tunables.semmns | Kernel tunables: Number of IPC Semaphores |
| hpux_tunables.shmseg | Kernel tunables: Number of Shared Memory Segments |
| hr_cpu | CPU utilization via SNMP HOST-RESOURCES-MIB |
| hr_fs | Used space in filesystems via SNMP |
| hr_mem | Usage of physical and virtual RAM using SNMP |
| hwg_humidity | HWg-STE Ethernet Thermometer: Humidity |
| hwg_temp | HWg-STE Ethernet Thermometer: Temperature |
| hyperv_checkpoints | Hyper-V VMs: Age of oldest Checkpoint |
| hyperv_vms | Hyper-V Server: State of VMs |
| hyperv_vmstatus | Hyper-V VMs: VM Status, Integration Services |
| ibm_imm_fan | Fan rpm via IBM Integrated Management Module (IMM) |
| ibm_imm_health | System health via IBM Integrated Management Module (IMM) |
| ibm_imm_temp | Temperature Sensors via IBM Integrated Management Module (IMM) |
| ibm_imm_voltage | Voltages of Power Supply and CMOS Battery via IBM Integrated Management Module (IMM) |
| ibm_rsa_health | Systems health via IBM Remote Supervisor Adapter (RSA) |
| ibm_storage_ts | IBM Tape Library: Info |
| ibm_storage_ts.drive | IBM Tape Library: Drive Status |
| ibm_storage_ts.library | IBM Tape Library: Library Status |
| ibm_storage_ts.status | IBM Tape Library: Device Status |
| ibm_svc_array | IBM SVC / Storwize V3700 / V7000: Status of RAID Arrays |
| ibm_svc_disks | IBM SVC / Storwize V3700 / V7000: Summary of Disks |
| ibm_svc_enclosure | IBM SVC / Storwize V3700 / V7000: Status of Enclosures, Canisters and PSUs |
| ibm_svc_enclosurestats.power | IBM SVC / Storwize V3700 / V7000: Power Consumption of Enclosures |
| ibm_svc_enclosurestats.temp | IBM SVC / Storwize V3700 / V7000: Temperature of Enclosures |
| ibm_svc_eventlog | IBM SVC / Storwize V3700 / V7000: Messages in Event log |
| ibm_svc_host | IBM SVC / Storwize V3700 / V7000: Status of Hosts Connected |
| ibm_svc_license | IBM SVC / Storwize V3700 / V7000: Licensing Status |
| ibm_svc_mdisk | IBM SVC / Storwize V3700 / V7000: Status and Mode of MDisks |
| ibm_svc_mdiskgrp | IBM SVC / Storwize V3700 / V7000: Status and Usage of MDisksGrps |
| ibm_svc_node | IBM SVC / Storwize V3700 / V7000: Status of IO Groups |
| ibm_svc_nodestats.cache | IBM SVC / Storwize V3700 / V7000: Cache Usage per Node |
| ibm_svc_nodestats.cpu_util | IBM SVC / Storwize V3700 / V7000: CPU Utilization per Node |
| ibm_svc_nodestats.disk_latency | IBM SVC / Storwize V3700 / V7000: Latency for Drives/MDisks/VDisks per Node |
| ibm_svc_nodestats.diskio | IBM SVC / Storwize V3700 / V7000: Disk Throughput for Drives/MDisks/VDisks per Node |
| ibm_svc_nodestats.iops | IBM SVC / Storwize V3700 / V7000: IO operations/sec for Drives/MDisks/VDisks per Node |
| ibm_svc_portfc | IBM SVC / Storwize V3700 / V7000: Status of FC Ports |
| ibm_svc_portsas | IBM SVC / Storwize V3700 / V7000: Status of SAS Ports |
| ibm_svc_system | IBM SVC / V7000: System Info |
| ibm_svc_systemstats.cache | IBM SVC / V7000: Cache Usage in Total |
| ibm_svc_systemstats.cpu_util | IBM SVC / V7000: CPU Utilization in Total |
| ibm_svc_systemstats.disk_latency | IBM SVC / V7000: Latency for Drives/MDisks/VDisks in Total |
| ibm_svc_systemstats.diskio | IBM SVC / V7000: Disk Throughput for Drives/MDisks/VDisks in Total |
| ibm_svc_systemstats.iops | IBM SVC / V7000: IO operations/sec for Drives/MDisks/VDisks in Total |
| ibm_tl_changer_devices | IBM tape library: Changer devices |
| ibm_tl_media_access_devices | IBM tape library: Media access devices |
| ibm_xraid_pdisks | IBM servers: Physical Disks |
| icom_repeater | ICOM Repeater: Operation Status |
| icom_repeater.pll_volt | ICOM Repeater: PLL Lock Voltage |
| icom_repeater.ps_volt | ICOM Repeater: Power Supply Voltage |
| icom_repeater.temp | ICOM Repeater: Temperature |
| if | Traffic and status of network interfaces using 32 bit counters |
| if64 | Monitor network interfaces via standard MIB using 64 Bit counters |
| if64_tplink | TP-LINK switches: Network Interfaces |
| if64adm | Monitor network interfaces including the ifAdminStatus |
| if_brocade | Brocade VDX devices: Network interfaces via standard MIB using 64 Bit counters |
| if_lancom | LANCOM devices: Network interfaces via standard MIB using 64 Bit counters |
| ifoperstatus | Operational status of network interfaces - DEPRECATED |
| infoblox_dhcp_stats | Infoblox devices: DHCP statistics |
| infoblox_dns_stats | Infoblox devices: DNS statistics |
| infoblox_grid_status | Infoblox devices: Grid replication status |
| infoblox_node_services | Infoblox devices: Node services |
| infoblox_replication_status | Infoblox devices: Replication status |
| infoblox_services | Infoblox devices: Services |
| infoblox_temp | Infoblox devices: System and CPU temperature |
| innovaphone_channels | Innovaphone Gateway: ISDN Channels |
| innovaphone_cpu | Innovaphone Gateway: CPU utilization |
| innovaphone_licenses | Innovaphone Gateway: Port licenses |
| innovaphone_mem | Innovaphone Gateway: Memory Usage |
| innovaphone_priports_l1 | Innovaphone Pri L1 Gateways: Pri Ports |
| innovaphone_priports_l2 | Innovaphone Pri L2 Gateways: Pri Ports |
| innovaphone_temp | Innovaphone Gateway: Current Temperature |
| inotify | Inotify - Monitor file system operations |
| intel_true_scale_chassis_temp | Intel True Fabric Scale Switches: Chassis temperature status |
| intel_true_scale_fans | Intel True Fabric Scale Switches: Fans status and speed |
| intel_true_scale_psus | Intel True Fabric Scale Switches: Power supplies status |
| intel_true_scale_sensors_temp | Intel True Fabric Scale Switches: Slot temperature sensors |
| ipmi | Hardware sensors with ipmitool |
| ipmi_sensors | IPMI sensors via freeipmi |
| ipr400_in_voltage | Omnitronics IPR400 VoIP Device: Input Voltage |
| ipr400_temp | Omnitronics IPR400 VoIP Device: Temperature |
| ironport_misc | IronPort Appliances: Hardware sensors |
| isc_dhcpd | Number of free addresses in DHCP pools on ISC DHCP-Daemon on Linux |
| ispro_sensors_digital | Interseptor Pro devices: Digital in sensors |
| ispro_sensors_humid | Interseptor Pro devices: Humidity sensors |
| ispro_sensors_temp | Interseptor Pro devices: Temperature sensors |
| j4p_performance.app_sess | J4P Performance: Sessions - DEPRECATED |
| j4p_performance.app_state | J4P Performance: Application status - DEPRECATED |
| j4p_performance.mem | Memory usage of Java application server via JMX and j4p.war - DEPRECATED |
| j4p_performance.serv_req | J4P Performance: Requests - DEPRECATED |
| j4p_performance.threads | Threads of Java application server via JMX and j4p.war - DEPRECATED |
| j4p_performance.uptime | Uptime of Java application server via JMX and j4p.war - DEPRECATED |
| janitza_umg | Janitza Power Analyzer: Input phases |
| janitza_umg.freq | Janitza Power Analyzer: Frequency |
| janitza_umg.temp | Janitza Power Analyzer: Temperature |
| jar_signature | Signatures of JAR files |
| job | Job Monitoring |
| jolokia_info | Type and version of Java application servers |
| jolokia_metrics.app_sess | Number of JVM sessions |
| jolokia_metrics.app_state | State of JVM applications |
| jolokia_metrics.bea_queue | BEA Weblogic: Length of queue |
| jolokia_metrics.bea_requests | BEA Weblogic: Requests to JVM sessions |
| jolokia_metrics.bea_sess | BEA Weblogic: Number of JVM sessions |
| jolokia_metrics.bea_threads | BEA Weblogic: Number of JVM threads |
| jolokia_metrics.cache_hits | JVM ehcache statistics: cache usage |
| jolokia_metrics.gc | Java virtual machine garbage collection |
| jolokia_metrics.in_memory | JVM ehcache statistics: in-memory cache usage |
| jolokia_metrics.mem | Memory usage of a JVM |
| jolokia_metrics.off_heap | JVM ehcache statistics: off-heap cache usage |
| jolokia_metrics.on_disk | JVM ehcache statistics: on-disk cache usage |
| jolokia_metrics.perm_gen | Perm Space usage of a JVM |
| jolokia_metrics.requests | BEA Weblogic: Requests to JVM instances |
| jolokia_metrics.serv_req | Number of Requests |
| jolokia_metrics.threads | Number of JVM threads |
| jolokia_metrics.tp | Tomcat number of threads in thread pool |
| jolokia_metrics.uptime | Uptime of JVM |
| jolokia_metrics.writer | JVM ehcache statistics: cache writer |
| juniper_alarm | Juniper Ethernet Switch: Chassis Alarm |
| juniper_bgp_state | Juniper Routers: BGP Status |
| juniper_cpu | CPU utilization of the last 1/5/15 minutes |
| juniper_cpu_util | Juniper: CPU utilization |
| juniper_fru | Juniper Ethernet Switch: Power Supply |
| juniper_fru.fan | Juniper Ethernet Switch: Fan |
| juniper_mem | Juniper Ethernet Switch: Memory |
| juniper_screenos_cpu | Juniper ScreenOS CPU utilization of the last 1/5/15 minutes |
| juniper_screenos_fan | Juniper/ScreenOS: FAN health status |
| juniper_screenos_mem | Juniper/ScreenOS: Memory Usage |
| juniper_screenos_temp | Juniper/ScreenOS: Temperature Sensors |
| juniper_screenos_vpn | Juniper/ScreenOS: VPN Tunnel State |
| juniper_temp | Juniper Ethernet Switch: Temperature |
| juniper_trpz_aps | Number of online access points |
| juniper_trpz_aps_sessions | Radios data and sessions of online access points |
| juniper_trpz_cpu_util | Juniper/Trapeze CPU utilization of the last few seconds and 1/5 minutes |
| juniper_trpz_flash | Juniper/Trapeze: Check flash states |
| juniper_trpz_info | Juniper/ Trapeze Serial and Firmware Version |
| juniper_trpz_mem | Juniper/Trapeze: Memory Usage |
| juniper_trpz_power | Juniper/Trapeze: Check for PSU Units |
| kaspersky_av_client | Kaspersky Anti-Virus: Signature and Fullscan |
| kaspersky_av_quarantine | Kaspersky Anti-Virus Quarantine |
| kaspersky_av_tasks | Kaspersky Anti-Virus tasks status |
| kaspersky_av_updates | Kaspersky Anti-Virus updates |
| kemp_loadmaster_ha | Kemp Loadmaster HA |
| kemp_loadmaster_realserver | Kemp Loadmaster Realserver |
| kemp_loadmaster_services | Kemp Loadmaster Services |
| kentix_amp_sensors | Kentix Alarmmanager Pro: Temperature |
| kentix_amp_sensors.humidity | Kentix Alarmmanager Pro: Humidity Sensor |
| kentix_amp_sensors.leakage | Kentix Alarmmanager Pro: Leakage Sensor |
| kentix_amp_sensors.smoke | Kentix Alarmmanager Pro: Smoke detection |
| kentix_humidity | Kentix MultiSensor: Humidity Sensor |
| kentix_temp | Kentix MultiSensor: Temperature Sensor |
| kernel | Various Linux kernel counters |
| kernel.util | CPU utilization |
| knuerr_rms_humidity | Knürr RMS Humidity |
| knuerr_rms_temp | Knürr RMS Temperature |
| knuerr_sensors | Knürr RMS Sensors |
| lgp_info | Liebert MPH/MPX devices: general information |
| lgp_pdu_aux | Liebert MPH/MPX devices: PDU AUX sensors |
| lgp_pdu_info | Liebert MPH/MPX devices: Power Distribution information |
| libelle_business_shadow.archive_dir | Libelle Business Shadow: Total / Used Space in Archive Dir |
| libelle_business_shadow.info | Libelle Business Shadow: System Infos |
| libelle_business_shadow.process | Libelle Business Shadow: Active Process |
| libelle_business_shadow.status | Libelle Business Shadow: Status |
| liebert_bat_temp | Liebert UPS Device: Temperature sensor |
| liebert_chiller_status | Liebert Chiller: Status |
| livestatus_status | Performance and settings of a Check_MK/OMD instance |
| lnx_bonding | State of Bonding network interface on Linux |
| lnx_if | State of network interfaces of Linux hosts |
| lnx_quota | Linux File System Quotas |
| lnx_thermal | Thermal sensors supported by Linux kernel |
| local | local: Integrate custom checks via arbitrary scripts on the agent |
| logins | Number of logged in users |
| logwatch | Check logfiles for relevant new messages |
| logwatch.ec | Forward Logwatch Messages to the Event Console |
| logwatch.ec_single | Forward Logwatch Messages to the Event Console |
| logwatch.groups | Grouping of logfiles |
| lparstat_aix | lparstat on AIX - CPU utilization and assignment for LPARs |
| lparstat_aix.cpu_util | lparstat on AIX - CPU utilization |
| lsi.array | LSI RAID array |
| lsi.disk | Status of a disk in an LSI RAID array |
| lvm_vgs | LVM: Volume groups |
| mailman_lists | Mailinglist statistics of Mailman |
| mbg_lantime_ng_fan | Meinberg LANTIME devices: Fans (NG MIB) |
| mbg_lantime_ng_power | Meinberg LANTIME devices: Power Supply (NG MIB) |
| mbg_lantime_ng_refclock | Meinberg LANTIME Devices: Non-GPS Refclock State (NG MIB) |
| mbg_lantime_ng_refclock.gps | Meinberg LANTIME Devices: GPS Refclock State (NG MIB) |
| mbg_lantime_ng_state | Meinberg LANTIME devices: General state (NG MIB) |
| mbg_lantime_ng_temp | Meinberg LANTIME devices: Temperature (NG MIB) |
| mbg_lantime_refclock | Meinberg LANTIME devices: Reflock state |
| mbg_lantime_state | Meinberg LANTIME devices: General state |
| mcafee_av_client | McAfee Anti-Virus Signature Date |
| mcafee_webgateway | McAfee web gateway: statistics |
| mcafee_webgateway_info | McAfee web gateway: product and revision infomation |
| mcafee_webgateway_misc | McAfee web gateway: miscellaneous |
| mcdata_fcport | McData FibreChannel Switches: Traffic and Status of Ports |
| md | Linux softraid devices |
| megaraid_bbu | LSI MegaRAID: State of battery backup unit (BBU) |
| megaraid_ldisks | LSI MegaRAID: Logical disks |
| megaraid_pdisks | LSI MegaRAID: State of physical disks |
| mem.linux | Detailed usage of RAM, Swap, VMalloc and other memory areas on Linux |
| mem.used | Usage of physical and virtual RAM |
| mem.vmalloc | Usage of Vmalloc address space |
| mem.win | Usage of main memory and page file |
| mikrotik_signal | Mikrotik Wlan Bridge: Signal Strength |
| mkbackup | Check_MK Appliance backup job state |
| mkbackup.site | Check_MK site backup job state |
| mkeventd_status | Status and performance of the Check_MK Event Console |
| mknotifyd | Check_MK Notification Spooler |
| mknotifyd.connection | Check_MK Notification Spooler Connection |
| mongodb_asserts | MongoDB Assert |
| mongodb_collections | MongoDB Collection Size |
| mongodb_connections | MongoDB Connections |
| mongodb_counters | MongoDB Operation Counters |
| mongodb_flushing | MongoDB Flushing |
| mongodb_instance | MongoDB Instance |
| mongodb_locks | MongoDB Locks |
| mongodb_mem | MongoDB Memory |
| mongodb_replica | MongoDB Replica Info |
| mounts | Options of mounted filesystems |
| moxa_iologik_register | Moxa IOLogik Register Check |
| mq_queues | Apache ActiveMQ Queue lengths |
| mrpe | MRPE: MK's Remote Plugin Executor |
| msexch_activesync | MS Exchange Active Sync Performance |
| msexch_autodiscovery | MS Exchange Auto Discovery Performance |
| msexch_availability | MS Exchange Availability Performance |
| msexch_dag.contentindex | MS Exchange DAG ContentIndex State |
| msexch_dag.copyqueue | MS Exchange DAG CopyQueue Length |
| msexch_dag.dbcopy | MS Exchange DAG DBCopy State |
| msexch_database | MS Exchange Database Latency |
| msexch_isclienttype | MS Exchange Information Store Client Type Performance |
| msexch_isstore | MS Exchange Information Store Performance |
| msexch_owa | MS Exchange OWA Performance |
| msexch_replhealth | MS Exchange DAG Replication Health Test |
| msexch_rpcclientaccess | MS Exchange RPC Client Access Performance |
| mssql_backup | Last successful backup of MSSQL tablespaces |
| mssql_blocked_sessions | MSSQL Blocked Sessions |
| mssql_counters.cache_hits | MSSQL cache hit ratio |
| mssql_counters.file_sizes | Size of data- and logfiles of MSSQL tablespaces |
| mssql_counters.locks | Locks per second in MSSQL tablespaces |
| mssql_counters.locks_per_batch | MSSQL locks per batch |
| mssql_counters.pageactivity | MSSQL page activity |
| mssql_counters.sqlstats | SQL Statistics values for MSSQL |
| mssql_counters.transactions | Transactions per second in MSSQL tablespaces |
| mssql_datafiles | Size of MSSQL datafiles |
| mssql_instance | General state of MSSQL instances |
| mssql_tablespaces | MSSQL tablespace size information |
| mssql_transactionlogs | Size of MSSQL transactionlogs |
| mssql_versions | versions of MSSQL server processes |
| mtr | MTR ping/traceroute to destination |
| multipath | State of multipathing on Linux |
| mysql | MySQL: Version |
| mysql.connections | MySQL Database: Maximum connection usage since startup |
| mysql.innodb_io | MySQL InnoDB engine IO statistics |
| mysql.sessions | MySQL Database sessions |
| mysql_capacity | Size of MySQL tablespaces |
| mysql_ping | MySQL Deamon: Staus |
| mysql_slave | MySQL Database: Slave Sync Status |
| netapp_api_aggr | NetApp Filers: Used space of aggregations |
| netapp_api_cluster | NetApp Ontap Filers: 7Mode Cluster Status |
| netapp_api_connection | NetApp API connection |
| netapp_api_cpu | NetApp Filers: Cluster-Mode CPU Utilization |
| netapp_api_cpu.nvram_bat | NetApp Clustermode Filer: NVRAM Battery |
| netapp_api_cpu.utilization | NetApp Filers: 7Mode Global CPU Utilization |
| netapp_api_disk.summary | NetApp Filers: Disk summary |
| netapp_api_fan | NetApp Filer: FANs |
| netapp_api_fcp | NetApp Cluster-Mode: State of fibrechannel interfaces |
| netapp_api_if | State of network interfaces |
| netapp_api_info | NetApp Filer: Version Info |
| netapp_api_protocol | NetApp Filer 7Mode: Protocols |
| netapp_api_psu | NetApp Filer: Power Supplies |
| netapp_api_qtree_quota | NetApp Filers: Used space of qtrees in volumes |
| netapp_api_snapshots | NetApp Filers: Used Space in Filesystems |
| netapp_api_snapvault | NetApp Filer: Snapvault/Snapmirror lag-time |
| netapp_api_status | NetApp Filer: Overall system health |
| netapp_api_temp | NetApp Filer: Temperature sensors |
| netapp_api_vf_stats | NetApp Filer 7Mode: vFiler CPU Utilization |
| netapp_api_vf_stats.traffic | NetApp Filers: vFiler Traffic |
| netapp_api_vf_status | NetApp Filer: vFiler status |
| netapp_api_volumes | NetApp Filers: Used space and traffic of volumes |
| netapp_api_vs_status | NetApp Filer: vServer status |
| netapp_api_vs_traffic | NetApp Filer: vServer Traffic Summary |
| netapp_cluster | NetApp Ontap Filers: MetroCluster Status |
| netapp_cpu | NetApp Filers: CPU Utilization |
| netapp_fcpio | NetApp Filers: Fibre Channel IOPS |
| netapp_vfiler | NetApp Ontap Filers: vFiler Status |
| netapp_volumes | NetApp Filers: Health and State of Volumes |
| netctr.combined | Errors and traffic over network interfaces |
| netextreme_cpu_util | Extreme Networks Switch: CPU utilization |
| netextreme_fan | Extreme Networks Switch: Fan State and Speed |
| netextreme_psu | Extreme Networks Switch: Power Supply |
| netextreme_psu_in | Extreme Networks Switch: Input Power Supply |
| netextreme_psu_out | Extreme Networks Switch: Output Power Supply |
| netextreme_temp | Extreme Networks Switch: Temperature |
| netif.link | Network interfaces on Linux: Link - DEPRECATED |
| netif.params | Network interfaces on Linux: Parameters - DEPRECATED |
| netscaler_cpu | Citrix Netscaler CPU Utilization |
| netscaler_dnsrates | Citrix Netscaler DNS Rates |
| netscaler_ha | Citrix Netscaler High Availability |
| netscaler_health.fan | Citrix Netscaler Loadbalancer: Speed of Fans |
| netscaler_health.psu | Citrix Netscaler Loadbalancer: Power Supply Health |
| netscaler_health.temp | Citrix Netscaler Loadbalancer: Temperature Sensors |
| netscaler_mem | Citrix Netscaler Memory Utilization |
| netscaler_tcp_conns | Citrix Netscaler TCP Connections |
| netscaler_vserver | Citrix Netscaler VServer Status |
| netstat | Established TCP Connections or TCP/UDP Listeners |
| nfsexports | NFS exports |
| nfsmounts | Health of NFS mounts |
| nginx_status | Performance indicators of NGINX web server |
| ntp | NTP peers |
| ntp.time | NTP time synchronization using ntpd |
| nullmailer_mailq | Length of the nullmailer mailqueue |
| nvidia.errors | GPU errors on NVIDIA graphics card |
| nvidia.temp | Temperatures of NVIDIA graphics card |
| nvidia.temp_core | Temperatures of NVIDIA graphics card |
| omd_apache | Apache access statistics of OMD sites |
| omd_status | Status of OMD sites |
| openhardwaremonitor | Hardware Sensors via OpenHardwareMonitor: Clock |
| openhardwaremonitor.fan | Hardware Sensors via OpenHardwareMonitor: Fans |
| openhardwaremonitor.power | Hardware Sensors via OpenHardwareMonitor: Power |
| openhardwaremonitor.smart | Hardware Sensors via OpenHardwareMonitor: S.M.A.R.T. |
| openhardwaremonitor.temperature | Hardware Sensors via OpenHardwareMonitor: Temperature |
| openvpn_clients | OpenVPN client connections |
| oracle_asm_diskgroup | ORACLE ASM Disk Groups |
| oracle_crs_res | Oracle Clusterware: Cluster Resources |
| oracle_crs_version | Oracle Clusterware: Version Information |
| oracle_crs_voting | Oracle Clusterware: Voting Check |
| oracle_dataguard_stats | Check apply and transport lag of Oracle Data-Guard |
| oracle_diva_csm | DIVA Content Storage Management: Library Status |
| oracle_diva_csm.actor | DIVA Content Storage Management: Actor Status |
| oracle_diva_csm.archive | DIVA Content Storage Management: Archive Status |
| oracle_diva_csm.drive | DIVA Content Storage Management: Drive Status |
| oracle_diva_csm.objects | DIVA Content Storage Management: Objects |
| oracle_diva_csm.tapes | DIVA Content Storage Management: Blank Tapes |
| oracle_instance | Oracle Database Instance |
| oracle_jobs | ORACLE Database Jobs |
| oracle_locks | ORACLE Database Locks |
| oracle_logswitches | Log switch activity of ORACLE database |
| oracle_longactivesessions | ORACLE Database Long Active Sessions |
| oracle_performance | ORACLE tablespaces: perfomance data |
| oracle_processes | ORACLE Database Processes |
| oracle_recovery_area | ORACLE Database Recovery Area |
| oracle_recovery_status | Check Checkpoint and user managed Backup state of datafiles |
| oracle_rman | Check the RMAN Backup Status |
| oracle_rman_backups | ORACLE RMAN Backups |
| oracle_sessions | Number of active sessions in ORACLE database |
| oracle_tablespaces | Various aspects of ORACLE tablespaces |
| oracle_undostat | Check Undo Retention of Oracle Instances |
| oracle_version | Version of an ORACLE database checked by login |
| ovs_bonding | State of Bonding network interface on Open vSwitch |
| palo_alto | Palo Alto Firewall: Status |
| palo_alto_sessions | Palo Alto Firewall: Sessions |
| pandacom_10gm_temp | Pandacom SpeedCarrier Chassis 5u: 10 GM Module Temperature |
| pandacom_fan | Pandacom SpeedCarrier Chassis 5u: Fan State |
| pandacom_fc_temp | Pandacom SpeedCarrier Chassis 5u: FC Module Temperature |
| pandacom_psu | Pandacom SpeedCarrier Chassis 5u: Power Supply State |
| pandacom_sys_temp | Pandacom SpeedCarrier Chassis 5u: System Temperature |
| papouch_th2e_sensors | Papouch TH2E Devices: Temperature Sensors |
| papouch_th2e_sensors.dewpoint | Papouch TH2E Devices: Dew point Sensors |
| papouch_th2e_sensors.humidity | Papouch TH2E Devices: Humidity Sensors |
| pdu_gude_8301 | Gude PDU units (8301): Power and Voltage |
| pdu_gude_8310 | Gude PDU units (8310): Power and Voltage |
| perle_chassis | Perle Mediaconverter: Chassis diagnostic status |
| perle_chassis.temp | Perle Mediaconverter: Chassis temperature |
| perle_chassis_slots | Perle Mediaconverter: Chassis slots diagnostic status |
| perle_modules_cm1000 | Perle Mediaconverter: CM 1110 modules states |
| perle_modules_cm1110 | Perle Mediaconverter: CM 1000 modules states |
| perle_modules_mgt | Perle Mediaconverter: Management module |
| perle_psmu | Perle Mediaconverter: Power supplies |
| perle_psmu.fan | Perle Mediaconverter: Fan status |
| pfsense_counter | pfSense Counter |
| pfsense_if | pfSense Interface |
| pfsense_status | pfSense Status |
| plesk_backups | FTP backups of Plesk domains |
| plesk_domains | Dumps out the domains configured in Plesk |
| postfix_mailq | Length of the postfix mailqueues |
| postfix_mailq_status | Status of postfix mail instances |
| postgres_bloat | PostgreSQL Database Bloat |
| postgres_conn_time | PostgreSQL Connection Time |
| postgres_connections | PostgreSQL Database Connections |
| postgres_locks | PostgreSQL Locks |
| postgres_query_duration | PostgreSQL Query Duration |
| postgres_sessions | PostgreSQL Database sessions |
| postgres_stat_database | Database statistics for PostgreSQL |
| postgres_stat_database.size | Database Size for PostgreSQL |
| postgres_stats | PostgreSQL Database Last Vacuum and Analyze |
| postgres_version | Postgres Version |
| printer_alerts | Generic Printer: Alerts reported |
| printer_input | Generic Printer: Input Unit State |
| printer_output | Generic Printer: Output Unit State |
| printer_pages | Generic Printer: Number of printed pages |
| printer_pages_ricoh | Ricoh Color Printers: Number of printed pages. |
| printer_supply | Generic Printer: Remaining filling level |
| printer_supply_ricoh | Ricoh Printers: Remaining filling level |
| prism_alerts | Nutanix Prism: Alerts |
| prism_containers | Nutanix Prism: Containers |
| prism_info | Nutanix Prism: General info about a cluster |
| ps | State and Count of Processes |
| ps.perf | State and Count of Processes (with additional performance data) |
| pvecm_nodes | Proxmox Virtual Environment: Node Status |
| pvecm_status | Proxmox Virtual Environment: Cluster Status |
| qlogic_fcport | QLogic SANbox Fibre Channel Switches: Fibre Channel Ports |
| qlogic_sanbox.psu | QLogic SANbox Fibre Channel Switches: Status of Power Supplies |
| qlogic_sanbox.temp | QLogic SANbox Fibre Channel Switches: Temperatur Sensors |
| qlogic_sanbox_fabric_element | QLogic SANbox Fibre Channel Switches: Status of Fabric Elements |
| qmail_stats | Length of the qmail Mailqueue |
| qnap_disks | QNAP NAS: Harddisk Status |
| quantum_libsmall_door | Door status of small Quantum tape libraries |
| quantum_libsmall_status | Status of small Quantum tape libraries |
| raritan_emx | Raritan EMX devices: Temperature |
| raritan_emx.binary | Raritan EMX devices: Door States |
| raritan_emx.fan | Raritan EMX devices: Fan State and Speed |
| raritan_emx_sensors | Raritan EMX Devices External Sensors: Contact |
| raritan_emx_sensors.airflow | Raritan EMX Devices External Sensors: Air flow |
| raritan_emx_sensors.humidity | Raritan EMX Devices External Sensors: Humidity |
| raritan_emx_sensors.pressure | Raritan EMX Devices External Sensors: Pressure |
| raritan_emx_sensors.temp | Raritan EMX Devices External Sensors: Temperature |
| raritan_pdu_inlet | Raritan PX-2000 family PDU inlet sensor state |
| raritan_pdu_inlet_summary | Raritan PX-2000 family PDU inlet sensor state |
| raritan_pdu_ocprot | Raritan PX-2000 family PDU overcurrent protector |
| raritan_pdu_outletcount | Raritan PX-2000 family PDU outlet count |
| raritan_pdu_plugs | Raritan PX-2000 family PDU plug state |
| raritan_px2_sensors | Raritan PX2 Devices External Sensors: Temperature |
| raritan_px2_sensors.airflow | Raritan PX2 Devices External Sensors: Air Flow |
| raritan_px2_sensors.humidity | Raritan PX2 Devices External Sensors: Humidity |
| raritan_px2_sensors.pressure | Raritan PX2 Devices External Sensors: Pressure |
| raritan_px_outlets | Raritan PX Devices Outlets: Voltage, Current, Power, Apparent Power, Energy |
| raritan_px_sensors | Raritan PX Devices Sensors: Temperature |
| raritan_px_sensors.binary | Raritan PX Devices Sensors: Contact |
| raritan_px_sensors.humidity | Raritan PX Devices Sensors: Humidity |
| rds_licenses | Remote desktop licenses |
| rmon_stats | Traffic Analysis of Network Interfaces using RMON |
| rms200_temp | RMS200 Unit: Temperatures |
| rstcli | Intel Rapid Storage Technologie: State of raid volumes |
| rstcli.pdisks | Intel Rapid Storage Technologie: State of physical disks in raids |
| ruckus_spot_ap | Ruckus Spot Access Points |
| sansymphony_alerts | Sansymphony: Alerts |
| sansymphony_pool | Sansymphony: Pool |
| sansymphony_ports | Sansymphony: Ports |
| sansymphony_serverstatus | Sansymphony: Serverstatus |
| sansymphony_virtualdiskstatus | Sansymphony: Virtualdiskstatus |
| sap.dialog | SAP Dialog Statistics Monitoring |
| sap.value | SAP Single Value Monitoring |
| sap.value-groups | SAP Single Value Monitoring Groups |
| sap.value_groups | SAP Single Value Monitoring Groups |
| sap_state | SAP Host State |
| saprouter_cert | SAP router certificate: validity age |
| sensatronics_temp | Sensatronics E4 Temperature sensors |
| sentry_pdu | Sentry PDU Devices |
| sentry_pdu_outlets | Sentry PDU Devices: Outlets |
| sentry_pdu_systempower | Sentry PDU Devices: System Power |
| services | Windows Services |
| services.summary | Windows Services |
| siemens_plc.counter | Siemens PLC: Counter values |
| siemens_plc.duration | Siemens PLC: Duration values |
| siemens_plc.flag | Siemens PLC: Binary flag values |
| siemens_plc.info | Siemens PLC: Output text values |
| siemens_plc.temp | Siemens PLC: Temperature values |
| siemens_plc_cpu_state | Siemens PLC: CPU state |
| skype | Skype For Business - General Information |
| skype.conferencing | Skype For Business - Conferencing |
| skype.data_proxy | Skype For Business - Data Proxy |
| skype.edge | Skype For Business - Edge Server |
| skype.edge_auth | Skype For Business - Edge Authentication |
| skype.mcu | Skype For Business - Multipoint Control Unit |
| skype.mediation_server | Skype For Business - Mediation Server |
| skype.mobile | Skype For Business - Mobile |
| skype.sip_stack | Skype For Business - SIP Stack |
| skype.xmpp_proxy | Skype For Business - XMPP Proxy |
| smart.stats | HDD health statistics using S.M.A.R.T |
| smart.temp | Temperature of HDDs using S.M.A.R.T |
| sni_octopuse_cpu | Siemens Octopus E: CPU Utilization |
| sni_octopuse_status | Siemens Octopus E global status |
| sni_octopuse_trunks | Siemens Octopus E trunk ports |
| snmp_info | Retrieve informational SNMP data about host |
| snmp_uptime | Uptime of SNMP hosts |
| solaris_fmadm | Fault Class on Solaris |
| solaris_mem | Memory usage in solaris |
| solaris_multipath | Multipathing on Solaris |
| solaris_prtdiag_status | Prtdiag based health check for solaris |
| solaris_services.summary | SMF Solaris: Services Summary |
| sophos | Sophos Email Appliance: Module States |
| sophos_messages | Sophos Email Appliance: Inbound and outbound messages |
| statgrab_cpu | CPU utilization |
| statgrab_disk | Disk IO |
| statgrab_load | CPU load (by statgrab) |
| statgrab_mem | Usage of physical and virtual RAM |
| statgrab_net | Network Interfaces: Traffic |
| steelhead_connections | Riverbed Steelhead: Connection Stats |
| steelhead_peers | Riverbed Steelhead Peer Connections |
| steelhead_status | Riverbed Steelhead: Overall Status |
| strem1_sensors | Sensatronics EM1 Devices: Temperature, humidity, wetness |
| stulz_alerts | STULZ Clima Unit: Alerts |
| stulz_humidity | STULZ Clima Unit: Air Humidity |
| stulz_powerstate | STULZ Clima Unit: Power State |
| stulz_pump | STULZ Clima Unit: Pump Status |
| stulz_temp | STULZ Clima Unit: Temperatures |
| supermicro | Supermicro Health |
| supermicro.sensors | Supermicro Health Sensors |
| supermicro.smart | Supermicro Health Smart |
| superstack3_sensors | 3Com SuperStack 3 Switches: Hardware / FRU sensors |
| sylo | State of the sylo daemon |
| sym_brightmail_queues | Symantec brightmail scanners: Mail Queues |
| symantec_av_progstate | Symantec Anti Virus Program state |
| symantec_av_quarantine | Symantec Anti Virus Quarantine |
| symantec_av_updates | Symantec Anti Virus Update Status |
| synology_disks | Synology NAS: Harddisk Status |
| synology_fans | Synology NAS: System and CPU FAN status |
| synology_info | Synology NAS: Info |
| synology_raid | Synology NAS: RAID Status |
| synology_status | Synology NAS: System and Power Status |
| synology_update | Synology NAS: Update Status |
| systemtime | Synchronization of operating system time |
| tcp_conn_stats | Number of TCP connections per state |
| timemachine | Age of latest backup by timemachine |
| tinkerforge | Tinkerforge sensor brick: Master |
| tinkerforge.ambient | Tinkerforge sensor bricklet: Ambient |
| tinkerforge.humidity | Tinkerforge sensor bricklet: Humidity |
| tinkerforge.motion | Tinkerforge sensor bricklet: Motion Detectors |
| tinkerforge.temperature | Tinkerforge sensor bricklet: Temperature |
| tsm_drives | IBM Tivoli Storage Manager (TSM): Backup Drives |
| tsm_paths | IBM Tivoli Storage Manager (TSM): Paths |
| tsm_scratch | IBM Tivoli Storage Manager (TSM): Number of Tapes in Scratch Pool |
| tsm_sessions | IBM Tivoli Storage Manager (TSM): Age of Sessions in RecvW or MediaW state |
| tsm_stagingpools | IBM Tivoli Storage Manager (TSM): Staging Pools |
| tsm_storagepools | IBM Tivoli Storage Manager (TSM): Usage of Storage Pools |
| ucd_cpu_load | CPU load average on systems using UCD SNMP Daemon |
| ucd_cpu_util | CPU utilization via SNMP from UCD daemon |
| ucd_disk | Disk space of mounted disks on systems using UCD SNMP Daemon |
| ucd_mem | Total and used Memory on systems using UCD SNMP Daemon |
| ucd_processes | Processes on systems using UCD SNMP Daemon |
| ucs_bladecenter_fans | UCS Bladecenter Fans: Health status of fans |
| ucs_bladecenter_fans.temp | UCS Bladecenter Fans: Temperature information |
| ucs_bladecenter_faultinst | UCS Bladecenter: Fault Instances |
| ucs_bladecenter_if | UCS Bladecenter fibrechannel, ethernet and interconnect interfaces |
| ucs_bladecenter_psu | UCS Bladecenter: Chassis Voltage |
| ucs_bladecenter_psu.chassis_temp | UCS Bladecenter: Chassis Temperature |
| ucs_bladecenter_psu.switch_power | UCS Bladecenter: Power Supply Switch |
| ucs_bladecenter_topsystem | UCS Bladecenter: TopSystem Info |
| unitrends_backup | Unitrends Backup Schedules |
| unitrends_replication | Unitrends Replication status |
| ups_bat_temp | Generic UPS Device: Temperature sensor |
| ups_capacity | Generic UPS Device: Remaining battery capacity |
| ups_eaton_enviroment | Eaton UPS Devices: Temperature and Humidity Sensors |
| ups_in_freq | Generic UPS Device: In frequency |
| ups_in_voltage | Generic UPS Device: Input voltage |
| ups_modulys_alarms | Socomec Modulys UPS Device: Alarms |
| ups_modulys_battery | Socomec Modulys UPS Device: Battery status |
| ups_modulys_battery.temp | Socomec Modulys UPS Device: Battery temperature |
| ups_modulys_inphase | Socomec Modulys UPS Device: Input phases |
| ups_modulys_outphase | Socomec Modulys UPS Device: Output phases |
| ups_out_load | Generic UPS Device: OUT load |
| ups_out_voltage | Generic UPS Device: Out voltage |
| ups_power | Generic UPS Device: Output power |
| ups_socomec_capacity | Socomec UPS Device: Remaining battery capacity |
| ups_socomec_in_voltage | Socomec UPS Device: Input Voltage |
| ups_socomec_out_source | Socomec UPS Device: Power source for output phases |
| ups_socomec_out_voltage | Socomec UPS Device: Output Voltage |
| ups_socomec_outphase | Socomec UPS Device: Output phases |
| ups_test | Generic UPS Device: Self Test |
| uptime | Uptime of operating system |
| varnish | HTTP Accelerator Statistics via Varnishstat on Linux: Uptime |
| varnish.backend | HTTP Accelerator Statistics via Varnishstat on Linux: Backend |
| varnish.backend_success_ratio | HTTP Accelerator Statistics via Varnishstat on Linux: Backend Success Ratio |
| varnish.cache | HTTP Accelerator Statistics via Varnishstat on Linux: Cache |
| varnish.cache_hit_ratio | HTTP Accelerator Statistics via Varnishstat on Linux: Cache Hit Ratio |
| varnish.client | HTTP Accelerator Statistics via Varnishstat on Linux: Client |
| varnish.esi | HTTP Accelerator Statistics via Varnishstat on Linux: ESI |
| varnish.fetch | HTTP Accelerator Statistics via Varnishstat on Linux: Fetch |
| varnish.objects | HTTP Accelerator Statistics via Varnishstat on Linux: Objects |
| varnish.worker | HTTP Accelerator Statistics via Varnishstat on Linux: Worker |
| varnish.worker_thread_ratio | HTTP Accelerator Statistics via Varnishstat on Linux: Worker Thread Ratio |
| vbox_guest | Version of VirtualBox guest additions in Linux guests |
| veeam_client | veeam client backup check |
| veeam_jobs | veeam backup server check |
| veritas_vcs | Veritas Cluster Service: Cluster State |
| veritas_vcs.resource | Veritas Cluster Service: Resource |
| veritas_vcs.servicegroup | Veritas Cluster Service: Service Group |
| veritas_vcs.system | Veritas Cluster Service: System |
| viprinet_firmware | Viprinet: Firmware Status |
| viprinet_mem | Viprinet: Memory Usage |
| viprinet_power | Viprinet: Power Supplies |
| viprinet_router | Viprinet: Router Mode |
| viprinet_serial | Viprinet: Serial Number |
| viprinet_temp | Viprinet: Temperature Levels |
| vms_cpu | CPU utilization and IO-Wait |
| vms_diskstat.df | Disk space on OpenVMS |
| vms_if | Traffic of network interfaces on OpenVMS |
| vms_queuejobs | OpenVMS Queue Jobs |
| vms_system.ios | Number of total IOs on OpenVMS |
| vms_system.procs | Number of processes on OpenVMS |
| vms_users | Interactively logged in users in OpenVMS |
| vmstat_aix | CPU utilization |
| vxvm_enclosures | Veritas VxVM: Enclosures |
| vxvm_multipath | Veritas VxVM: Multipath |
| vxvm_objstatus | Veritas VxVM: Status of Objects |
| wagner_titanus_topsense.airflow_deviation | Wagner Titanus Top Sens: Airflow Deviation from Set Point |
| wagner_titanus_topsense.alarm | Wagner Titanus Top Sens: Alarms Triggered |
| wagner_titanus_topsense.chamber_deviation | Wagner Titanus Top Sens: Chamber Deviation from Calibration Point |
| wagner_titanus_topsense.info | Wagner Titanus Top Sens: System Infos |
| wagner_titanus_topsense.overall_status | Wagner Titanus Top Sens: Overall Status |
| wagner_titanus_topsense.smoke | Wagner Titanus Top Sens: Smoke Detectors |
| wagner_titanus_topsense.temp | Wagner Titanus Top Sens: Temperature |
| websphere_mq_channels | IBM Websphere MQ Channel Message count |
| websphere_mq_queues | IBM Websphere MQ Queue Status and Message count |
| win_dhcp_pools | Number of free addresses in DHCP pools on Windows DHCP servers |
| win_dhcp_pools.stats | Number of transactions since startup of the Windows DHCP |
| win_netstat | Established TCP Connections or TCP/UDP Listeners |
| win_printers | Windows Printers: Queue and printer states |
| windows_broadcom_bonding | Broadcom Bonding network interface on windows |
| windows_intel_bonding | Intel Bonding network interface on windows |
| windows_multipath | Multipathing |
| windows_os_bonding | Bonding Network Interface on Windows (Operating System Level) |
| windows_tasks | Check Windows Task Scheduler |
| windows_updates | Number of pending windows updates and needed reboot state |
| winperf.cpuusage | CPU usage on Windows systems (deprecated) |
| winperf.diskstat | Disk IO on Windows systems |
| winperf_if | State and performance of network interfaces of Windows hosts |
| winperf_mem | Windows memory statistics |
| winperf_msx_queues | Length of MS Exchange queues |
| winperf_phydisk | Disk throughput on Windows |
| winperf_processor.util | CPU utilization on Windows systems |
| winperf_tcp_conn | Number of TCP connections per state |
| winperf_ts_sessions | Microsoft Terminal Server Sessions |
| wmi_cpuload | Windows CPU Load |
| wmi_webservices | Microsoft WebServices |
| wmic_process | Ressource consumption of windows processes |
| wut_webio_io.inputs | WuT Web-IO: Analogue Input Channels |
| wut_webtherm | WuT Web-Thermograph: Temperature |
| wut_webtherm.humidity | WuT Web-Thermograph: Humidity |
| wut_webtherm.pressure | WuT Web-Thermograph: Air Pressure |
| zfs_arc_cache | ZFS arc Cache: Hit Ratios and Sizes |
| zfs_arc_cache.l2 | ZFS arc L2 Cache: Hit Ratio and Size |
| zfsget | Used space in ZFS pools and filesystems |
| zpool | ZFS Storage Pool sizes |
| zpool_status | ZFS Storage Pool status |
| zypper | Check for (security) updates via Zypper |
