Check manual page of netapp_api_if
State of network interfaces
This check monitors the operational status, link speed, traffic, packet
counts, discards and errors of network interfaces of a NetApp Filer.
Right now only the ethernet and virtual interfaces are checked.
For virtual interfaces the check raises a WARN if not all members of
this virtual interface have the same speed set.
Depending on the check parameters this check can go WARN or CRIT when the
port status changes (i.e. is down), when the link speed changes (e.g. a
port expected to be set to 1GBit/s operates only at 100MBit/s), when the
absolute or procentual traffic of a port exceeds certain levels or if the
rate of errors or discards exceeds configurable limits.
This check supports averaging the in- and outgoing traffic over a
configurable range of time by using an exponentially weighted moving average.
The averaging can be configured on a per host and per port base. This is
done by adding a key "average" to the parameter dictionary with the number
of minutes that the average should cover as its key. Port with averaging
turned on output two additional performance values: the averaged traffic
in bytes. If you have configured traffic levels, then those levels are
applied to the averaged values.
It might be a good idea to use the option "Use description as service name
for network interface checks", since there is no real interface index available
and can change over time.
There are three allowed ways to specify a port: 1: the index of the interface
(depends on the order of the data reported by the agent), the ifDescr of
the port or the ifAlias of the port. If you are using the alias, you have to
make sure that it is unique by configuring useful aliases in the switch.
Check_MK does not check for uniqueness.
The inventory creates one service for each port that fulfills configurable conditions.
Grouping: In some situations you do not want to monitor a single
interface but a group of interfaces that together form a pool.
The if check supports such pools by defining groups.
You can specifiy the members of a group by their port type and the item name(s) of
the single interfaces. The data of all members is accumulated and put together
in a single grouped interface service.
You can specify the groups with the ruleset if_groups.
Groups are defined as list of dictionaries.
The keys are:
"name": String. Name of the group within the service description
"iftype": Integer. Interface port type as integer
"include_items": List of Strings. Interface item name. This name depends
on further settings like if_inventory_uses_alias or if_inventory_uses_description
"single"(optional): Bool. Interfaces in this group do not show up
as single service if "single" is set to True (Default: False)
For example: if_groups = (["name" : "Group vFiler0", "iftype" : 6, "single" : True], ["lan"], ALL_HOSTS )